Latest Products
- Volkswagen Beetle£9.00
- Standard Beaverette Armoured Car Mk II£8.00
- Humber Armoured Car Mk IV£13.00
- AEC Armoured Car Mk I£15.00
- Guy Armoured Car Mk Ia£12.00
- Guy Armoured Car MkI£12.00
- Coventry Armoured Car (v2)£14.00
- Marmon Herrington Mk III£15.00
- Armoured Carrier Wheeled Indian Pattern MkII£13.00
- Staghound Armoured Car Howitzer£15.00
- Staghound Armoured Car AA (v2)£15.00
- Staghound Armoured Car MKIII (v2)£15.00
- Concrete Tank Traps (based)£4.00
- Concrete Tank Traps£4.00
- Type 24 Pillbox (Mowlem)£18.00
- Type 24 Pillbox (damaged)£18.00
- Type 23 Pillbox (damaged)£18.00
- Type 23 Pillbox£18.00
- Type 25 Pillbox (concrete base)£8.00
- Type 25 Pillbox (dug-in)£5.00
- Type 25 Pillbox (damaged)£8.00
- Type 25 Pillbox£8.00
- Type 26 Pillbox Prefab£10.00
- Type 26 Pillbox Prefab (damaged)£10.00
- Type 26 Pillbox (damaged)£10.00
- Type 26 Pillbox£10.00
- Type 22 Pillbox (damaged)£10.00
- Type 22 Pillbox£10.00
- M8 Ammunition Trailer£6.00
- Ben Hur G-527 Water Trailer£7.00
- Ben Hur G-518 Trailer (open)£6.00
- Ben Hur G-518 Trailer (covered)£18.00
Model comes as seven parts.
This is a nicely detailed large church which has fallen into ruin either through time or bombing, you decide.
The church is made up of several sections including a two-piece tower and the 3D modelling looks great. It measures approximately 640mm long by 230mm wide 300mm tall.
It may be expensive but it is a quality model which takes around 95 hours to print.
The tower is hollow so if you want your minis to stand on top of the tower you will need to fit a floor of card or balsa wood, though this can be done quite easily.
The model can be glued together or left in parts as they all but up against each other nicely, or you might want to magnetise it for easy transportation and rebuilding.
This is a nicely detailed large church which has fallen into ruin either through time or bombing, you decide.
The church is made up of several sections including a two-piece tower and the 3D modelling looks great. It measures approximately 640mm long by 230mm wide 300mm tall.
It may be expensive but it is a quality model which takes around 95 hours to print.
The tower is hollow so if you want your minis to stand on top of the tower you will need to fit a floor of card or balsa wood, though this can be done quite easily.
The model can be glued together or left in parts as they all but up against each other nicely, or you might want to magnetise it for easy transportation and rebuilding.
- Availability: In Stock