Military

A set of 10 oil drums. Can be used as terrain or objective markers.

Each barrel measures approximately 12mm diameter by 19mm tall and are suitable as 1/56 or 28mm scale.

A set of 6 oil drums. Can be used as terrain or objective markers.

Each barrel measures approximately 12mm diameter by 19mm tall and are suitable as 1/56 or 28mm scale.

Models comes as one part.

This is a set of five anti-tank concrete blocks as used in the UK during WWII. They were produced in various sizes but the majority were either 3ft 6 or 5 feet tall.

These models represent 3'6 versions.

Please note: Model comes as a resin print only

Models comes as one part.

This is a set of five anti-tank concrete blocks as used in the UK during WWII. They were produced in various sizes but the majority were either 3ft 6 or 5 feet tall.

These models represent 3'6 versions and come with a fixed base.

Please note: Model comes as a resin print only

Item comes as one part.

The Czech Hedgehog was so called because it was first used in Czechoslovakia on the order with Germany in the late 1930s.

It was an anti-tank barrier made from three strips of angled metal beams, the earliest of which were 1.8metres in length, welded together.

The  models are made of resin in one piece and each pack comes with 10 hedgehogs.

Model comes in two parts; Base and lid

These prefabricated steel pillboxes were a feature of Japanese defenses at Tarawa.

They were double skinned with a layer if sand between the walls and were used as command posts. Some were fitted with up to  two heavy machine guns.

They measured 9 feet at the base and were just over 8 feet tall.

Model comes in two parts; bunker & roof

This is a historical reproduction of one of the bunkers at the Merville Gun Battery which was a few miles from Sword Beach in Normandy.

The roof is removable.

The  1/56 scale model measures approximately 186mm long, 200mm wide and 40mm tall.

Model comes in one part.

This is a mini fuel dump consisted of a rectangular textured base which has 5 fuel drums and 5 fuel cans.

The mini fuel drum can be used as objective marker or just general scatter terrain.

The  1/56 scale model measures approximately 60mm long, 45mm wide and 20mm tall.

Model comes as two parts; base and roof.

The Type 22 pill box was hexagon shaped. It had an entrance on one side and embrasures (gun ports) on five sides. It was officially known as the FW3/22.

The walls were between 12 and 24 inches thick and the internal size was around 10 feet, wall to wall.

The model measures approximately 72mm by 62mm by 48mm tall.

Please note: Model comes as a resin print only

Model comes as two parts; base and roof.

The Type 22 pill box was hexagon shaped. It had an entrance on one side and embrasures (gun ports) on five sides. It was officially known as the FW3/22.

The walls were between 12 and 24 inches thick and the internal size was around 10 feet, wall to wall.

The model measures approximately 72mm by 62mm by 48mm tall.

This version comes with some damage showing general wear ands tear in the concrete.

Please note: Model comes as a resin print only

Model comes as two parts; base and roof.

The Type 23 pill box was rectangular pillbox. It was made of an open square and a closed square with a roof. The closed section has  three embrasures (gun ports). The open side has a mount for a Bren or Lewis gun. It was officially known as the FW3/23.

The walls were 12 inches thick and it measured about eight by sixteen feet. 

The model measures approximately 124mm by 70mm by 64mm tall.

Please note: Model comes as a resin print only

Model comes as two parts; base and roof.

The Type 23 pill box was rectangular pillbox. It was made of an open square and a closed square with a roof. The closed section has  three embrasures (gun ports). The open side has a mount for a Bren or Lewis gun. It was officially known as the FW3/23.

The walls were 12 inches thick and it measured about eight by sixteen feet. 

The model measures approximately 124mm by 70mm by 64mm tall.

This version depicts some damage showing wear and tear.

Please note: Model comes as a resin print only

Model comes as two parts; base and roof.

The Type 24 pill box was an irregular hexagon shaped pillbox. It had an entrance and five embrasures (gun ports). It was officially known as the FW3/24.

The walls were 12 inches thick though some had thicker walls. The rear wall measured about thirteen feet and the other five walls were 8 feet long. 

The model measures approximately 95mm by 80mm by 76mm tall.

This version depicts some damage showing wear and tear.

Please note: Model comes as a resin print only

Model comes as two parts; base and roof.

The Type 24 pill box was an irregular hexagon shaped pillbox. It had an entrance and five embrasures (gun ports). It was officially known as the FW3/24. 

This is a variant of the Type 24 and was round

The walls were 15 inches thick though some had thicker walls. 

The model measures approximately 90mm by 90mm by 52mm tall.

Please note: Model comes as a resin print only

Model comes as two parts; base and roof.

The Type 25 pill box was the only WWII circular pillbox. It had an entrance on one side and three embrasures (gun ports). It was officially known as the FW3/25.

The walls were 12 inches thick and the internal diameter was about six feet. This is the prefabricated version  of the pillbox. It was made of prebuilt concrete slats and posts.

The model measures approximately 58mm by 58mm by 48mm tall.

Please note: Model comes as a resin print only

Model comes as two parts; base and roof.

The Type 25 pill box was the only FW3 circular pillbox. It had an entrance on one side and three embrasures (gun ports). It was officially known as the FW3/25.

The walls were 12 inches thick and the internal diameter was about eight feet. 

The model measures approximately 67mm by 67mm by 65mm tall.

This version depicts a pillbox which has a thick concrete base

Please note: Model comes as a resin print only

Model comes as two parts; base and roof.

The Type 25 pill box was the only WWII circular pillbox. It had an entrance on one side and three embrasures (gun ports). It was officially known as the FW3/25.

The walls were 12 inches thick and the internal diameter was about six feet. This is the prefabricated version  of the pillbox. It was made of prebuilt concrete slats and posts.

The model measures approximately 58mm by 58mm by 48mm tall.

This version depicts some damage showing general wear and tear.

Please note: Model comes as a resin print only

Model comes as two parts; base and roof.

The Type 25 pill box was the only FW3 circular pillbox. It had an entrance on one side and three embrasures (gun ports). It was officially known as the FW3/25.

The walls were 12 inches thick and the internal diameter was about eight feet. 

The model measures approximately 58mm by 58mm by 30mm tall.

This version depicts a pillbox which is dug into the ground so only the top part is showing.

Please note: Model comes as a resin print only

Model comes as two parts; base and roof.

The Type 26 pill box was a simple square shape. It had an entrance on one side and embrasures (gun ports) on the other three. It was officially known as the FW3/26.

The walls were 18 inches thick and the external wall size was around 10 feet.

The model measures approximately 62mm by 62mm by 48mm tall.

Please note: Model comes as a resin print only

Model comes as two parts; base and roof.

The Type 26 pill box was a simple square shape. It had an entrance on one side and embrasures (gun ports) on the other three. It was officially known as the FW3/26.

The walls were 18 inches thick and the external wall size was around 10 feet.

The model measures approximately 62mm by 62mm by 48mm tall.

This version is modelled with some damage showing general wear and tear.

Please note: Model comes as a resin print only