Latest Products
- Volkswagen Beetle£9.00
- Standard Beaverette Armoured Car Mk II£8.00
- Humber Armoured Car Mk IV£13.00
- AEC Armoured Car Mk I£15.00
- Guy Armoured Car Mk Ia£12.00
- Guy Armoured Car MkI£12.00
- Coventry Armoured Car (v2)£14.00
- Marmon Herrington Mk III£15.00
- Armoured Carrier Wheeled Indian Pattern MkII£13.00
- Staghound Armoured Car Howitzer£15.00
- Staghound Armoured Car AA (v2)£15.00
- Staghound Armoured Car MKIII (v2)£15.00
- Concrete Tank Traps (based)£4.00
- Concrete Tank Traps£4.00
- Type 24 Pillbox (Mowlem)£18.00
- Type 24 Pillbox (damaged)£18.00
- Type 23 Pillbox (damaged)£18.00
- Type 23 Pillbox£18.00
- Type 25 Pillbox (concrete base)£8.00
- Type 25 Pillbox (dug-in)£5.00
- Type 25 Pillbox (damaged)£8.00
- Type 25 Pillbox£8.00
- Type 26 Pillbox Prefab£10.00
- Type 26 Pillbox Prefab (damaged)£10.00
- Type 26 Pillbox (damaged)£10.00
- Type 26 Pillbox£10.00
- Type 22 Pillbox (damaged)£10.00
- Type 22 Pillbox£10.00
- M8 Ammunition Trailer£6.00
- Ben Hur G-527 Water Trailer£7.00
- Ben Hur G-518 Trailer (open)£6.00
- Ben Hur G-518 Trailer (covered)£18.00
Model comes as four parts, ground floor, first floor, second floor & roof.
This is the Miller House from the mythical town of Drennheim.
The ground floor consists of a covered outside corridor with doorway leading to a single room with stairs in the corner. The first floor has two rooms the larger of which has a staircase. The smaller room as a sloped roof and chimney. The second floor is a single large room.
The roof is separate and models can be placed inside the ground, first and second floors.
The model measures approximately 160mm by 190mm and is 305mm high
Paint and Glue Miniatures is a licensed printer for Wonder Worlds.
This is the Miller House from the mythical town of Drennheim.
The ground floor consists of a covered outside corridor with doorway leading to a single room with stairs in the corner. The first floor has two rooms the larger of which has a staircase. The smaller room as a sloped roof and chimney. The second floor is a single large room.
The roof is separate and models can be placed inside the ground, first and second floors.
The model measures approximately 160mm by 190mm and is 305mm high
Paint and Glue Miniatures is a licensed printer for Wonder Worlds.
- Designer: Wonder Worlds