Seconds

3D printing doesn't always run as smoothly as one might hope and occasionally a print will fail, sometimes with just a small fault like a broken mudguard or a deformed edge.

Here are some 'failed prints'  which can either be easily repaired with a bit of green putty or some ingenuity, or can be used as terrain, offered at a discount.

Also note - although not shown in all the images, each model will come as a full model with turret, tracks etc.

To see the latest additions first, change the Sort By box to "NAME Z - A".
Sort By:  
001: 1/56 GMC CCKW 353 1944 MG Truck - resin
This model has some malformation of the offside front bumper and grille. Other than that the print is fine.

The bumper could be repaired or left as is to depict battle damage.

Normal price £14.85
Allied Truck
£9.00
003: 1/56 GMC CCKW 353 1944 MG Truck - resin
This model has some malformation of the offside front bumper and grille. Other than that the print is fine.

The bumper could be repaired or left as is to depict battle damage.

Normal price £14.85
Allied Truck
£9.00
005: 1/56 Ford V3000 Maultier - resin
This model has a crack in the cab roof

It could be made good with a little modelling putty and some sanding or could be used to show  battle damage.

Normal price £14.85
German Halftrack
Out of Stock
£9.00
006: 1/56 Opel Blitz - resin
This model has a deformed rear offside wheel

A little bit of work would be required on the wheel so it might be only of use for some broken down terrain.

Normal price £16.20
German Truck
£7.00
007: 1/56 Sherman M4A3E8 - resin
This model has some really very minor damage to a track, you might have to look hard to find it and it probably wouldn't be visible from normal angles on the wargames table.

A small amount of modelling putty would sort this one out quite easily, if you needed to repair it at all.

Although not shown the model will come with a full turret.

Normal price £17.55

Link to Full Model
Allied Tank
£12.00
010: 1/56 GMC 353 CCKW 1944 MG Truck - resin
This model has some malformation of the rear offside mudguard. Other than that the print is fine.

You would probably not need to repair this and just depict it as a damaged mudguard.

It will come with the missing front wheel; which will reattach perfectly with a dab of superglue or epoxy resin.

Normal price £14.85

Link to Full Model
Allied Truck
£10.00
011: 1/56 M4A4 Sherman - resin
This model has a crack across the rear offside quarter.

S bit of modelling putty or green stuff will sort this one out in short order.

It will come with a full turret and a set of tracks.

Normal price £17.55

Link to Full Model
Allied Tank
Out of Stock
£12.00
012: 1/56 Vickers Mk I - resin
This model has a couple of millimetres missing from the bottom of the nearside track.

It looks like it could easily be repaired with a sliver of plastic or some modelling putty.

It will come with a full turret.

Normal price £14.85

Link to Full Model
British Tank
£10.00
014: 1/56 T-13 B2- resin
This model has a couple of cracks on the bottom of the offside track. It should be easily repairable with some modelling putty.

It will come with a full turret.

Normal price £12.15

Link to Full Model
Belgian Tank Hunter
£7.00
015: 1/56 T-13 B2- resin
This model has some cracks on the bottom of the both tracks. It should be easily repairable with some modelling putty.

It will come with a full turret.

Normal price £12.15

Link to Full Model
Belgian Tank Hunter
£6.50
022: 1/43 Schneider 155mm Artillery
This model has a crack across the top of the gun shield which has been repaired with some superglue. Some sanding might lessen the effect.

Note the unusual scale
Normal price £8.00
French Artillery
£4.00
023: 1/56 Opel Blitz - plastic
This model has a deformed rear nearside wheel which appears a little squished. It's not so obvious looking down on the model as per a wargames table rather than looking side on so you could probably get away with just using it as is.

Normal price £12.00

Link to Full Model
German Truck
Out of Stock
£7.00
026: 1/56 Autoprotetto S37 - Resin
This model has a a split through the bottom which has caused a small split in the offside rear wheel, inside the body floor and the nearside wheel arch.

Some modelling putty/green stuff should sort the problems out. Most of the problem area is on the underside where it won't be seen.

Normal price £11.48

Link to Full Model
Italian Transport
Out of Stock
£5.00
028: 1/56 M4A3 Sherman - resin
This model has 3 small holes in the front plate (caused by a failing printer screen). A small amount of modeller's putty/green stuff should sort this issue out.

Model will come with a full turret.

Normal price £17.55

Link to Full Model
Allied Tank
Out of Stock
£10.00
Per Page      1 - 14 of 14
  • 1